Many professionals are familiar with geared motors, because it is an important part of the transmission equipment as a source of power. Without it, the entire system of the transmission equipment will be paralyzed and no products can be produced. Therefore, a high-quality and absolutely professional motor will It is the key to the operation of the system. Taiwan Yongkun Motor Co., Ltd. seized this point and worked hard to develop a geared motor with high-speed operation and absolute quality. It runs stably, and it is not prone to failures during the operation of general motors.

The quality of the geared motor and the smooth running state are important factors for judging the quality of the motor. The quality of geared motors from Taiwan Yongkun Motor Company depends on many factors. The geared motors of Yongkun first require superior quality in the selection of materials, such as the quality of the motor core and the quality of the core, which have a great impact on the quality of the motor product. For example, the irregular groove shape will affect the quality of the embedded money, the burr is too large, the dimensional accuracy and tightness of the iron core, etc. will affect the magnetic permeability and loss, and the load capacity of the motor will be reduced. If the geared motor is used for a long time or the quality of the motor is not good, the load capacity will be reduced. At this time, the noise of the motor will be greater than normal. If the cooling fan of the geared motor is damaged or scratches the motor casing, the motor is not stable, etc. In short, if we can focus on prevention, combine prevention with precautions, and solve problems in response to problems, it will be conducive to the long-term durability of the geared motor. Therefore, the choice of ensuring the quality of the iron core punching sheet and the iron core is an important part of improving the quality of the geared motor.

The winding of Taiwan Yongkun Motor Co., Ltd. is the heart of the geared motor. Its service life and operational reliability mainly depend on the winding manufacturing quality and electromagnetic effects during operation, mechanical vibration and environmental factors. The choice of insulation material and structure, insulation defects and insulation treatment quality during the manufacturing process, DC affects the winding quality, so attention should be paid to winding manufacturing, winding drop and insulation treatment. Secondly, high machining accuracy is required in the manufacturing process. During the assembly process of the geared motor, all parts and accessories should be interchangeable, that is, the structural design is required to have clear dimensions, form and position tolerances and surface roughness requirements. This is a gear. The basis for the quality of geared motors. When some of the more sophisticated electrical service parts are completely interchangeable and cannot meet the requirements, they need to be assembled in groups. Ensure the assembly quality of the shaft tip, ensure the coaxiality of the stator and rotor and the straightness of the end cover bearing installation. To ensure the static balance and dynamic balance requirements of the rotor, pay special attention to the small and thin-walled parts without deformation and damage.